Tech Silica

ALESTONE™ Lightweight Foam Glass Aggregate

ALESTONE™ Lightweight Foam Glass Aggregate

At Tech Silica, we supply ALESTONE™, a line of graded lightweight foam glass aggregate offered in five defined gradations. Made in the USA from 100% recycled glass, ALESTONE™ is supplied as a loose aggregate that ready-mix producers, precast and block manufacturers, and material innovators can build into their own mixes, processes, and products.

Unlike an installed construction system, ALESTONE™ becomes part of what you make. You choose the gradation, and our team helps you evaluate it in your formulation. New to the material? Start with our overview of foam glass aggregate.

Benefits of ALESTONE™ Foam Glass Aggregate

Lightweight by Design

Cuts the unit weight of concrete, mortar, block, and panels compared with conventional sand and stone.

Five Defined Gradations

From under 150 microns to over one inch, there is a particle size for fine mortars through coarse fill.

100% Recycled Glass

Helps producers lower embodied carbon and meet sustainability targets with domestic, recycled content.

Made in the USA

Manufactured in Arkansas for dependable domestic supply without overseas lead times.

Available Grades

Select a grade to request the Technical Data Sheet (TDS):

01

ALESTONE™Micro

GradationLess than 150 µm
Typical Application AreasFine-particle applications, evaluated with our technical team for your specific formulation or process
02

ALESTONE™Small

GradationPassing US Sieve #16, retained on #100
Typical Application AreasMortars, dry mortars, GFRC/GRC, and evaluation as a sand-replacement component
03

ALESTONE™Medium

GradationPassing 1/2", retained on US Sieve #16
Typical Application AreasConcrete, CMU block, panels and boards, pipe bedding and insulation
04

ALESTONE™Large

GradationPassing 1", retained on 1/2"
Typical Application AreasGreen roofs, landscape architecture, insulation fill, drainage systems, lightweight fill
05

ALESTONE™XL

GradationRetained on 1"
Typical Application AreasAll-purpose loose lightweight fill for contractor, consumer, and distribution channels

How to Choose the Right Gradation

1

Choose a Gradation

Start with your particle-size requirements and the five ALESTONE™ grades.

2

Evaluate the Application

Review your mix design, production process, and performance targets with our team.

3

Request Samples & Technical Support

Plan the testing and qualification your product needs before full production.

Gradation defines particle size, not finished mix performance. Because every formulation is different, we recommend sample testing before scaling up. For lightweight concrete, ASR testing and ASTM C330 documentation can be requested where applicable.

Pair it with an SCMMany lightweight mixes also benefit from a supplementary cementitious material to boost strength and reduce permeability. Ask us about pairing ALESTONE™ with silica fume or ground glass pozzolan.

Frequently Asked Questions

ALESTONE™ comes in five gradations: Micro (under 150 µm), Small (#16 to #100 US Sieve), Medium (1/2″ to #16), Large (1″ to 1/2″), and XL (over 1″).

ALESTONE™ Small can be evaluated as a lightweight sand-replacement component in mortars, dry mortars, and GFRC. Replacement rates and performance depend on your formulation, so testing is recommended.

No. ALESTONE™ is a loose aggregate you incorporate into your own products. ACEGEO™ and ACEsulation™ are engineered systems that are installed and compacted to a project specification.

Contact Us for Pricing and Delivery

Our team is available to help you select the right ALESTONE™ gradation for your mix or product. Contact us to discuss your project needs or request product samples.

Scroll to Top