ACEGEO™ Lightweight Geotechnical Fill
ACEGEO™ Lightweight Geotechnical Fill
At Tech Silica, we supply ACEGEO™, an engineered lightweight geotechnical fill system made from 100% recycled foam glass aggregate. Designed as a sustainable alternative to EPS geofoam and traditional quarried fill, ACEGEO™ helps civil engineers, geotechnical engineers, and contractors reduce fill weight and lateral loads on road, wall, and site construction projects.
ACEGEO™ is a system, not simply a loose fill. Material selection, engineered section geometry, and controlled field compaction work together to create a stable, lightweight layer that meets the approved design.
Benefits of ACEGEO™ Lightweight Fill
Reduced Fill Weight
Lowers the load on soft, compressible, or settlement-prone soils.
Lower Lateral Pressure
Reduces lateral loading on retaining walls, MSE walls, and bridge abutments.
Compacted, Verifiable Layer
Angular foam glass pieces are mechanically compacted into a stable fill section with in-place verification.
Recycled and Domestic
Made from 100% recycled glass and manufactured in the USA.
ACEGEO™ Applications
Roads & Embankments
Use lightweight fill for road construction, embankments, and widening projects where reducing the load on underlying soils helps control settlement and improve stability.
Retaining Walls & Bridge Abutments
Place ACEGEO™ in retaining-wall and MSE-wall zones or behind bridge abutments to reduce lateral earth pressure and the load the structure must resist.
Utility & Civil Works
Coordinate geometry, placement, compaction, and acceptance criteria for other lightweight-fill applications, including site work over poor soils and fill around buried utilities.
How the ACEGEO™ System Is Installed
Performance is achieved in the compacted layer, so installation controls are part of the specification:
- Material selection matched to the project design
- Defined lift thickness for each placement
- Geotextile encasement of the fill section
- Confinement and engineered section geometry
- Mechanical compaction to the approved specification
- Field verification of achieved in-place unit weight
ACEGEO™ vs. EPS Geofoam
EPS geofoam is very light, but it is a petroleum-based plastic placed as blocks and must be protected from fuel and solvent spills. ACEGEO™ offers a mineral, recycled-glass alternative that is placed and compacted much like conventional granular fill, which can simplify work around irregular geometry and utilities. As a glass-based material, it is non-combustible and unaffected by the petroleum products that can damage polystyrene. Compared with quarried fill, it significantly reduces weight on the soils below.
Engineering Data to Confirm
Review these items with our team before finalizing your specification:
Installed loading
Saturated density
Placement & confinement
Compaction & testing
Submittals
Frequently Asked Questions
Lightweight geotechnical fill is a fill material that weighs much less than soil or quarried stone. It is used to reduce loads on weak soils and lateral pressure on walls and abutments in road and civil projects.
In many applications, yes. ACEGEO™ is engineered as a sustainable alternative to EPS geofoam and quarried fill. Suitability depends on the approved design, installation specification, and field verification.
No. ACEGEO™ is an engineered system. Its performance depends on correct material selection, geotextile encasement, lift placement, and mechanical compaction to the approved specification.
Contact Us for Pricing and Delivery
Our team is available to help you evaluate ACEGEO™ for your road, wall, or site project. Contact us to discuss your project needs, request technical documents, or request samples.